**AUCTION OPENS THURSDAY, APRIL 23, 2020 @ 8:00AM ET**

ENTERTAINING PRE-AUCTION OFFERS ON MAJOR ASSETS

CONTACT: FRANK DISALVO – (631) 249-5566

HYDRAULIC STRAIGHT SIDE PRESSES:

• (4) 550 Ton Sutherland Hydraulic Straight Side Presses, 84” x 72” Bed, 26” Stroke, 24” Minimum Shut Height, 50” Maximum Open Height, 6 Strokes Per Min Max., 35.75” Bolster Height, Mfg. Date 2004 VIEW VIDEO

ROBOTIC BLANK LOADERS:

• (3) ABB IRB-6600-1.75/2.8 Type B 6-Axis Robots, 6400R M99 Controls, Teach Pendants, Numerous Lifting Fixtures,  Refurbished 10/2005

TANDEM HYDRAULIC (5) PRESS LINE:

• (1) 880 Ton Sutherland Hydraulic Straight Side Press, 84” x 72” Bed, 26” Stroke, with Blank Feeder/De-stacker and ABB Controls, Mfg. Date 2004 VIEW VIDEO
• (1) 660 Ton Sutherland Hydraulic Straight Side Presses, 84” x 72” Bed, 26” Stroke, with Optima OPCTM 14/3050 30,000 Lb.  Quick Die Change VIEW VIDEO
• (3) 550 Ton Sutherland Hydraulic Straight Side Presses, 84” x 72” Bed, 26” Stroke, with Optima OPCTM 14/3050 30,000 Lb. Capacity Quick Die Change, Mfg. Date 2004
• (4) Transfer Robots with ABB Controls and Teach Pendants
• (3) Heavy Duty Scrap Conveyors

MECHANICAL PRESSES:

• 2000 Ton Danley SS2-2000 mechanical straight side press, 172” x 60” bed, 14” stroke, 40” shut height over bed, 10” slide adjustment, 12” thick bolster, 12-20 strokes per minute, 200 HP motor, 2015 Wintress Smart-Pac 2 Press Control,  (Extensive Rebuild by Enprotech Industrial Technologies 2015), Serial Number: 550828-01 VIEW VIDEO
• 800 Ton Bliss SE2-800 mechanical straight side press, 120” x 60”, 14” stroke
• 800 Ton Danley S4-800, mechanical straight side press, 108” x 66”, 16” stroke VIEW VIDEO
• 800 Ton Danley S2-800, mechanical straight side press, 96” x 60”, 12” stroke VIEW VIDEO
• 500 Ton Warco SE2-500-9654, mechanical straight side press, 96” x 54” bed VIEW VIDEO
• 400 Ton Wilkins & Mitchell S4-400, mechanical straight side press, 108” x 60”, 16” stroke, (3) Presses Available VIEW VIDEO

BLANKING LINE:

• Rowe 60” x .085” blanking line, (3) Coil Turnstile, Coil Car, 30,000 Lb. Uncoiler, Rowe C6-60,  .020”-.085” Straightener, Sheet Feeder, High Speed Mechanical Shear, Run-out Lift Table and Stacker, Control Console

FORKLIFTS/VEHICLES:

• 2005 Hoist Liftruck F350-24, 35,000Lbs., LPG
• Taylor 30,000lbs Fork Lift; Model TC-30000; LPG
• Clark 15,000lbs Fork Lift; Model CFC-70; LPG
• 2009 Caterpillar 9,000lbs Fork Lift; Model: GC45K-LP-SWB; LPG
• (2) 2008 Caterpillar 9,000lbs Fork Lifts; Model: GC45K-LP-SWB; LPG
• (2) 2007 Caterpillar 9,000lbs Fork Lifts; Model: GC45K-LP-SWB; LPG
• 2005 Caterpillar 9,000lbs Fork Lift; Model: GC45K-LP-SWB; LPG
• Mitsubishi 5,000lbs Fork Lift
• 2015 PowerBoss Commander 90LP Floor Scrubber
• Genie Z-30/20N Boom Lift

CNC MACHINING:

• (2) 2018 Haas DT-1 CNC Drilling & Tapping Center, X-20”, Y-16”, Z-15.5”, 10,000 RPM, 26” x 15” Table, 20+1 ATC, High Pressure Coolant, Chip Auger, Haas CNC Control, SN 1148284, 1148283
• (1) 2018 Haas VF-1 CNC Vertical Machining Center, X-20”, Y-16”, Z-20”, 8100 RPM, 26” x 14” Table, 20 ATC, High Pressure Coolant, Chip Auger, Haas CNC Control, S/N 1151220

CMM / INSPECTION:

• Brown & Sharpe ORYZO Cantilever Type Horizontal Arm CMM, S/N 0798/4301, PC-DMIS Control, 177” x 69” Steel Table, Travels: Y-150, Z-150, Renishaw PH10M Probe, PHD-10 Probe Head Drive Unit, Control Console Model HORIZ-183-121-1 229578, SN 0698-001, Teach Pendant, ProtoType Systems 118” x 59” Sub-Table, Desk w/ PC, Kennedy Roll-Around Tool Cabinet w/ Assorted Hardware, Last Calibrated 02/13/2019
• Large Quantity of Inspection Tools, Height Gauges, Granite Surface Plates, and More!

HORIZONTAL SURFACE GRINDER:

• 12” X 24” Okamoto Grind-X ACC 1224-ST Horizontal Surface Grinder, 12” x 24” Magnetic Chuck, 13.7” Under Wheel, Coolant Filtration System, S/N 83797

PLANT SUPPORT/FACILITIES:

• MT Clemens 10 Ton Bridge Crane – Approx. 40′ Span x 75′ Length
• 7.5 Ton Bridge Crane w/ 7.5 Ton Yale Hoist – Approx. 20′ x 40′
• Ingersoll Rand SSR-EPE150-2S Air Compressor; 150 HP

TOOL ROOM:

• (3) Bridgeport 618 Surface Grinders
• Bridgeport 16-8 Lathe
• Sharpe 1440V Lathe
• Bridgeport 1 1/2HP Mill
• (2) Sharp CNC Vertical Mills
• Lagun FCM-2000 Universal Mill
• Ikeda Radial Arm Drill
• Tennsmith Shear
• Grob Vertical Band Saw
• Miller Bobcat 250 Welder